SEARCH

Forced-Cooled Engines

The shaft is provided with a fan that runs independent of the engine cooling. Variable speed applications with low speeds, caused by insufficient cooling, high speed and might be the cause of the losses that motors are designed and standardized in order to prevent the increase in noise. Than 80 355 IE3 and IE4 both up to the size of the structure, powers all standard efficiency class (according to the standard IEC 60034-30-1) forced air-cooled engine manufactured

SMALL SERIES OF ALUMINIUM (THREE-PHASE)

Efficiency Class

IE3 and IE4

Size structure

From 80 up to 112

Power range

From 0.55 kW up to 4 kW

Voltage

230/400V and 400/690V, as well as all the usual tensions

Frequency

50hz, 60hz

Number of Poles

2 and 4 pole

Service factor

IE3: 1.15
IE4: 1.20
  • Aluminium injection body
  • Hard-footed with legs or detachable option
  • No driver may work without requiring extra precautions
  • Protection class IP55, optionally IP56 and IP65
  • 600C ambient temperature can operate at (service factor cannot be used in this case)
  • Low noise and vibration levels
  • It has modern lines in color RAL 1019

Typical Applications:

Pump

Fan

Compressor

Gearbox

Conveyors

Lifting equipment

Industrial machines

ALUMINUM MEDIUM SERIES

Efficiency Class

IE3 and IE4

Size structure

Up to 225 132 to

Power range

From 3 kW up to 55 kW

Voltage

230/400V and 400/690V, as well as all the usual tensions

Frequency

50hz, 60hz

Number of Poles

2, 4, 6 and 8 Pole

Service factor

IE3: 1.15
IE4: 1.20
  • Aluminium injection body
  • Footed installing
  • The junction box on the left and on the right can be translated in three directions, all at the top
  • No driver may work without requiring extra precautions
  • Protection class IP55, optionally IP56 and IP65
  • 600C ambient temperature can operate at (service factor cannot be used in this case)
  • Low sound level
  • It has modern lines in color RAL 1019

Typical Applications:

Pump

Fan

Compressor

Gearbox

Conveyors

Lifting equipment

Mixers

Mills

Industrial machines

PEAK SERIES

Efficiency Class

IE3 and IE4

Size structure

Than 160 up to 355

Power range

From 4 kW up to 500 kW

Voltage

400/690V, as well as all the usual tensions

Frequency

50hz, 60hz

Number of Poles

2, 4, 6 and 8 Pole

Service factor (315 build
to size up)

IE3: 1.15
IE4: 1.20
  • Peak body
  • Hard footed
  • The junction box top
  • May work with without requiring any further measures until 90kW driver
    Bearing rear cover rear 110kW and higher powers should be used for isolated or isolated
  • Protection class IP55, optionally IP56 and IP65
  • Structure size 315 up to 600C ambient temperature can operate at (service factor cannot be used in this case)
  • Low noise and vibration levels
  • It has modern lines in color RAL 1019

Typical Applications:

Cement Industry

Petrochemical

Pharmaceutical industry

Chemical industry

Printing

Pump

Fan

Compressor

Gearbox

Conveyors

Lifting equipment

Mixers

Mills

Industrial machines